MODEL FI-HEG

High Expansion Foam Generator

High Expansion Foam Generators

High expansion foam generator Model. FI-HEG is a device that produces a large amount of foam for fire extinguishing in large confined spaces. Its performance depends on the type of foam liquid used and the installation conditions, and it provides the best efficiency with fresh air. Made of stainless steel and carbon steel. It can be mounted on the wall or ceiling. Certified by Bureau Veritas according to EN 13565 standard and works effectively even in dirty, hot air conditions. It can be adjusted in different capacities and is ideal for fire extinguishing operations in large areas.

Product Features

Approvals

Bady

Stainless Steel

Riser

Carbon Steel

Nozzle

Full Cone In Brass / Can be installed in any position on the four axes.

Opsiyonel

Riser: Aisi 304/316 Nozzle: Aisi 304/316 Inlet connection: Flanged UNI or ANSI, threaded 2 ½” GAS M/F, 2 ½” NPT M/F, grooved

Note: The Expansion ratio depends on the foam concentrate and on installation conditions. It is recommended to supply the generator with fresh air in order to get best performances.

Note: This generator is certified with polluted air in inside air installation. Certificate number “Approval certificate M63018/19/MN/mn.
IT FILE 19.IT.3437488.139” and “Approval certificate M63077/21/MN/mn. IT FILE 21.IT 3989562.138” with the Notified body Bureau Veritas.

Documents

Related products

High Expansion Foam Generator (With Turbine)

The Turbine Type High Expansion Foam Generator (Model: FI-GEA) can produce large quantities of foam and is used in large indoor spaces. They can be calibrated to different capacities. Case material is stainless steel. Fan material can be made of synthetic material or aluminum material according to preference. The Turbine Type High Expansion Foam Generators are usually mounted on the wall or ceiling of closed areas. It is preferred in applications thanks to its compact design.

High Expansion Foam Generator (Compact)

The compact type high expansion foam generator Model: FI-GEA VENT1 is a large capacity foam generating equipment (maximum capacity 90 liters/minute). It is used to provide foam saturation during the extinguishing of large volume closed areas. Compact type high expansion foam generator is calibrated and shipped according to the desired capacity in the project. Foam distribution case is made of stainless steel material. The parts where the nozzle groups are mounted are made of carbon steel. If requested, this assembly can also be produced from stainless steel. Compact type high expansion foam generator is usually mounted on the wall or ceiling of closed areas. The compact type high expansion foam generator has been tested and certified by Bureau Veritas. This test and certification has confirmed that the compact type high expansion foam generator works as desired in closed areas with dirty and hot air without fresh air intake.

Fire Pumps

Foam Suppression Systems

Gaseous Suppression Systems

Kitchen Fire Suppression Systems

Flow Meters

Fire Valves and Sprinkler Groups

Seismic Bracing Systems

Coupling and Grooved Fittings